1000 a rear hub trouble

spudcaster · #1 PostAuthor: **spudcaster** » Wed Oct 09, 2013 9:38 pm

is there anybody out there who could tell me how to identify rear hubs ,ive got what im told is a 1000 a1 hub it has 4 bolt holes for the disc .trying to get the correct sprocket carrier to match this is proving to be a nightmare as the 2 ive been sold from a well known auction sight have been totally wrong. so im assuming they are 900 one,s no;040 ,but now im beginning to wonder if its the hub its self is wrong. the only no; i can find on it is K48 a-2 can anybody give me any advise, dimensions etc thanx spud

z1bman · #2 PostAuthor: **z1bman** » Wed Oct 09, 2013 9:58 pm

DOES YOUR HUB HAVE A CHROME RING ON THE HUB WHERE THE SPOKES ATTACH

spudcaster · #3 PostAuthor: **spudcaster** » Wed Oct 09, 2013 10:04 pm

yes on the disc side it is chrome

z1bman · #4 PostAuthor: **z1bman** » Wed Oct 09, 2013 10:13 pm

I KNOW THE Z1000 HAD THE CHROME RING BUT I AM SURE THE Z 750 TWIN HAD A CHROME RING + THEY ARE BOTH DIFFERENT HUB'S + SPROCKET CARRIERS

z1bman · #5 PostAuthor: **z1bman** » Wed Oct 09, 2013 10:25 pm

PICTURES OF Z1000 A1 WHEELS + HUBS

spudcaster · #6 PostAuthor: **spudcaster** » Wed Oct 09, 2013 10:27 pm

that will teach me to buy incomplete parts from abroad hopefulyl somebody may have some measurements ,i take it there both 40 spoke hubs

z1bman · #7 PostAuthor: **z1bman** » Wed Oct 09, 2013 10:37 pm

YES BOTH 40 SPOKES

spudcaster · #8 PostAuthor: **spudcaster** » Wed Oct 09, 2013 10:38 pm

z1bman wrote:PICTURES OF Z1000 A1 WHEELS + HUBS

yes it does look like it from that side .so maybe the hub is right and the sprocket carriers i have are from something else as 1 is to big to fit in and the other goes in but put it in the swing arm and the hub centre is way to far over to the right to get the caliper bracket in even without any spacers

z1000puddin · #9 PostAuthor: **z1000puddin** » Thu Oct 10, 2013 7:48 am

Spud
The 040 carrier is from a Z1000 Alloy wheel.Which are wider.
This one should measure about 45mm from edge to face of sprocket.

The one I have on my wire wheels is about 20mm, but I cant see the number as its still on the bike.

So not sure of the correct number though

Stu

spudcaster · #10 PostAuthor: **spudcaster** » Thu Oct 10, 2013 7:31 pm

that sounds more like it now i just need to find out the part number and somebody who has one they want to sell

z1bman · #11 PostAuthor: **z1bman** » Thu Oct 10, 2013 7:35 pm

have you tried john browse

spudcaster · #12 PostAuthor: **spudcaster** » Thu Oct 10, 2013 7:55 pm

z1bman wrote:have you tried john browse

i dont know who he is im new to the z scene and only know of z power can you tell me where i can contact him cheers

z1bman · #13 PostAuthor: **z1bman** » Thu Oct 10, 2013 8:01 pm

J Browse Motorcycles - Motorbike Parts in Wrexham LL13 7RP

Address:
11 Poyser Street
Wrexham
Clwyd
LL13 7RP
01978 355 556
Fax: 01978 366 663

z1000puddin · #14 PostAuthor: **z1000puddin** » Thu Oct 10, 2013 8:05 pm

I am pretty sure that the 1978 z1000 A2 is the same sprocket carrier

Stu

spudcaster · #15 PostAuthor: **spudcaster** » Thu Oct 10, 2013 8:05 pm

ok thanx for that i.ll give him a try

1000 a rear hub trouble

1000 a rear hub trouble

reply

reply

reply

Who is online