Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

rubber rear fender

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
alinus65
Regular Poster
Posts: 37
Joined: 1st Jan 2013
Location: Milan, Italy

rubber rear fender

#1 PostAuthor: alinus65 » Tue Mar 19, 2013 7:52 am

HI,

I complete the installation of the rear fender but I realized that I missed to install the two rubbers with number 92075-135.
From the drawing is not clear where I should fit them.
Any help?

Cheers

Image
Top
LondonZ1
100Club
100Club
Posts: 203
Joined: 20th Nov 2011
Location: London

#2 PostAuthor: LondonZ1 » Tue Mar 19, 2013 3:32 pm

I think that these go at the inner end of the tool tray/handbook recess. They fit into two holes in the tail unit. If I am right, then they are also quite tricky to fit as there is minimal clearance between the hole and the underside of the tail unit. I have solved this problem by deciding not to fit them.

I may be wrong, so corrections welcome.
Top
User avatar
z1bman
Hardcore
Hardcore
Posts: 4227
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

#3 PostAuthor: z1bman » Tue Mar 19, 2013 5:19 pm

THEY FIT ON THE INSIDE OF THE FRAME AT THE REAR WHERE THE INDICATOR MOUNTING BRACKET IS WELDED TO THE FRAME. THERE ARE TWO SMALL SQUARE MOUNTINGS WELDED TO THE FRAME WITH A HOLE IN THE MIDDLE + THE RUBBERS ARE FITTED THERE TO PREVENT THE REAR FENDER MOVING BETWEEN THE FRAME WHEN FITTED THEY WILL MAKE THE MUDGUARD A TIGHT FIT IN THE FRAME
Top
User avatar
Bill Newman
100Club
100Club
Posts: 459
Joined: 27th May 2007
Location: Ipswich

#4 PostAuthor: Bill Newman » Tue Mar 19, 2013 7:13 pm

z1bman wrote:THEY FIT ON THE INSIDE OF THE FRAME AT THE REAR WHERE THE INDICATOR MOUNTING BRACKET IS WELDED TO THE FRAME. THERE ARE TWO SMALL SQUARE MOUNTINGS WELDED TO THE FRAME WITH A HOLE IN THE MIDDLE + THE RUBBERS ARE FITTED THERE TO PREVENT THE REAR FENDER MOVING BETWEEN THE FRAME WHEN FITTED THEY WILL MAKE THE MUDGUARD A TIGHT FIT IN THE FRAME


Spot on
Top
User avatar
alinus65
Regular Poster
Posts: 37
Joined: 1st Jan 2013
Location: Milan, Italy

#5 PostAuthor: alinus65 » Tue Mar 19, 2013 10:40 pm

Done, thanks
Top
User avatar
DogsbolloxofZ1B
Hardcore
Hardcore
Posts: 1592
Joined: 28th Feb 2006
Location: Near Chichester

#6 PostAuthor: DogsbolloxofZ1B » Wed Mar 20, 2013 6:44 pm

Any images of the finished bike?

Mike
Top
User avatar
alinus65
Regular Poster
Posts: 37
Joined: 1st Jan 2013
Location: Milan, Italy

#7 PostAuthor: alinus65 » Wed Mar 20, 2013 9:33 pm

Not yet finished.
Yesterday evening I was installing the carbs and I realised that there were installed 4 carbs rubber holders rights ( :cry: ). I ordered the two holder left.
Waiting for cylinder for front caliper plus few more things.
Next weekend I am travelling for work.
Hopefully Easter week end I will try to push the start button

Photos will follow....

Ciao :clap
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 21 guests