exhaust collets

[daveltd]

Can somebody tell me the dimensions of z1000a and z1000j collets as i have a set to sell but not sure what model they fit cheers Dave

[Garn 1]

So you are really just after the Outside diameter of a z1000A exhaust pipe at the manifold and compare it with J motor exhaust pipe.

Now as i understand it, the Z1000A2 has the same Od as a Z900. So,I will be able to give you this tomorrow..... Someone else with a J motor can give you the OD of the J.

My guess, the J will be slightly bigger! But, maybe the same!
RegardZ.

[z1bman]

these are the collets fitted to the j + gpz models

http://www.ebay.co.uk/itm/New-Genuine-K ... 0943477581


these are for the z1/ z1000a models

http://www.ebay.co.uk/itm/Kawasaki-NOS- ... 0256729590

[Mr Puffin]

They different lengths. The J type are shorter, to fit the Kerker pipe`s to my J and septic i had to use the longer early 900 1000 type of collets. The Kerker was meant for an A1 the other an A4

[Garn 1]

Taking notice of both Z1bman & Mr Puffin posts, the length of the earlier Z1, Z900 & z1000 is 28mm overall.
Hopes this gives a definitive decision. I guess the later Z1000J will be smaller.

RegardZ.