I am refitting the carbs on my 1000A2 high bars and I cannot get the new cables to fit I have a set from Z Power and the cables are part number 54012 081 and 54012 087 can anyone help with ideas.
I can fit the return cable but the other is 20mm too short.
Thanks
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Z1000 A2 Throttle Cables
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Correct cables for KZ1000A1/A2 (USA SPEC) and Z1000A1 (UK & AUST. SPEC) are 54012-149 & 54012-150 which run high bars from factory.
For Z1000A2 (UK & AUST. SPEC) 54012-1020 & 54012-113 which run low bars from factory.
The ones you have being sold are for Z1/Z1A/Z1B and Z900A4/A5 and numeros police bikes, which run a very slightly lower bar.
For Z1000A2 (UK & AUST. SPEC) 54012-1020 & 54012-113 which run low bars from factory.
The ones you have being sold are for Z1/Z1A/Z1B and Z900A4/A5 and numeros police bikes, which run a very slightly lower bar.
Throttle Cables
Thanks for will send back to Z Power and order right ones.
Have a great 2013 and safe riding.
Have a great 2013 and safe riding.
Who is online
Users browsing this forum: No registered users and 11 guests