Need to source some new overflow hoses for my Z1. Anyone know what the correct Bore and OD size of these hoses are?
Cheers Dave
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Z1 carb overflow pipe
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Dave, can't tell you the size or the source of those tubes. I will offer some advice though... Use the smaller diameter size and don't under-estimate the length overall, required to have all four ending up at the same drain point.
Auto shops sell the old vacuum type black rubber tubing used for vacuum wipers etc. This will usually get you out of trouble.
Regardz.
Auto shops sell the old vacuum type black rubber tubing used for vacuum wipers etc. This will usually get you out of trouble.
Regardz.
Garn (Sydney) Z1, Z1A, Z1B and Z900-A4
Who is online
Users browsing this forum: No registered users and 22 guests