As a matter of fact, I am not sure, whether the GPZ1100UT has got harder valve springs than a Z1000J already in stock form ?
I will use the UT cams with shims on top of the buckets, firstly because I have them and secondly, because quite a few people use Andrews 3x with shims on top and they're a lot hotter...
So the question is: Would it make a difference to get UT valve springs or should I buy something from Ray Debben, because with valve springs, from my point of view, it is a case of: as hard as necessary, as soft as possible (to prevent unnecessary stress on the valve train).
Cheers,
Greg
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Harder valve springs for a Z1000J with UT cams ?
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Harder valve springs for a Z1000J with UT cams ?
There's no replacement for displacement!
Who is online
Users browsing this forum: No registered users and 16 guests