Hi all,
I have just been striping the top-end of my GS1000, and after taking all the valves, springs etc, out, I thought I would check all the buckets move ok, anyhow the inlet on no-1 is abit sticky/tight, the bucket is fine on any of the others, and I tryed another bucket to see what that was like, more or less the same, so its not the bucket, its the hole the bucket goes in, it looks fine no marks or scraps etc, any idea"s what I should do to sort it, any info much appriciated..
Andy
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Buckets on top-end sticking
Moderators: KeithZ1R, chrisu, paul doran, Taffus
-
kev edwards
- Hardcore
- Posts: 1487
- Joined: 3rd Apr 2009
- Location: leverington UK
Hi, i would get an internal mike and make sure bucket hole is not eliptical,sounds strange though have real close up look with a eye glass to make sure no crap in there!
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."
-Han Solo
You can't polish a turd, but you can roll it in glitter
Salad is what real food eats.
Anon
PUM 673
-Han Solo
You can't polish a turd, but you can roll it in glitter
Salad is what real food eats.
Anon
PUM 673
Who is online
Users browsing this forum: No registered users and 17 guests