Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
fuel tap
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Re: fuel tap
greenZ wrote:if you fit a pingel gravity fed fuel tap,instead of a vacuum tap what do you do with vacuum pipe ian
I would say plug it at the carb end , if not shorten the hose to an inch long still connected to the carb and plug it -
the rubber stoppers that fit on the z1 vacum take offs may fit right onto the carb / tract?
Vacuum fuel tap
You should plug the vaccum connection at the
carburettor side properly. Otherwise is draws air
at this point and does not run properly amymore.
carburettor side properly. Otherwise is draws air
at this point and does not run properly amymore.
Who is online
Users browsing this forum: No registered users and 19 guests