Ref 1979 UK spec Z1000-A3 (MKII)
Cradley Kawasaki tell me that the needle jet is no longer available from Kawasaki but confirmed the description / part no. as:
Needle jet 0-1 / 16017-1011
I spoke to Allens Performance & they told me that they need the Mikuni part no.
Anyone out there know what the Mikuni no. is?
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Needle Jet for z1000 MKII - Mikuni Ref?
Moderators: KeithZ1R, chrisu, paul doran, Taffus
-
Ginger Bear
- Hardcore
- Posts: 6850
- Joined: 16th Dec 2008
- Location: In the Dark.
- Contact:
Try this lot;
http://www.motocarb.co.uk/
The 0-1 should mean something to them.
I have used them & found them to be very helpful....... Good luck!
It is also my belief, that worn needle jets cause a lot of rich running problems, & whilst everything else in the carbs is readily available, these are not. Please let us know how you get on.........
............ GB
http://www.motocarb.co.uk/
The 0-1 should mean something to them.
I have used them & found them to be very helpful....... Good luck!
It is also my belief, that worn needle jets cause a lot of rich running problems, & whilst everything else in the carbs is readily available, these are not. Please let us know how you get on.........
............ GB
# 104
Phil Churchett Award Winner 2011 & 2016
Buzzworkz Best Modified Zed 2016
Ginger Bear wrote:Try this lot;
http://www.motocarb.co.uk/
The 0-1 should mean something to them.
I have used them & found them to be very helpful....... Good luck!
It is also my belief, that worn needle jets cause a lot of rich running problems, & whilst everything else in the carbs is readily available, these are not. Please let us know how you get on.........
............ GB
Many thanks I'll give them a try.
Who is online
Users browsing this forum: No registered users and 14 guests