Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

GPZ900 carbs into Z1 ? what inlet rubbers would work?

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
simon gilling
Regular Poster
Posts: 96
Joined: 25th Apr 2002
Location: Warwickshire

GPZ900 carbs into Z1 ? what inlet rubbers would work?

#1 PostAuthor: simon gilling » Sun May 06, 2007 1:18 pm

I have a set of GPZ900r carbs in good nick, they have about the same spacing as the Zed 9 carbs. Any idea if they would work well, if so what carb inlets would do the job to connect them to the Zeds head? possibly Z1000J or ZXR750, or even GPZ900r inlet rubbers?

I have seen Z1000J carbs on a Z1000A... has anyone tried other carb options?

Thanks

Simon G
Don't ask me, I just got here myself!
Top
Jerry
President
President
Posts: 460
Joined: 22nd Dec 2001
Contact:
Contact Jerry

#2 PostAuthor: Jerry » Mon May 07, 2007 12:12 pm

Hi Simon, Don't know if its any help but Z1100 inlets bolt up to the Z head, but have got a bigger bore - I've used them for 33mm smoothies and 36mm GSXR carbs.
Top
User avatar
simon gilling
Regular Poster
Posts: 96
Joined: 25th Apr 2002
Location: Warwickshire

#3 PostAuthor: simon gilling » Mon May 07, 2007 3:39 pm

Jerry
If you have one to hand could you measure the internal diameter, so I cna check whether they would fit the GPZ9 carbs, Thanks.
Simon

p.s. I have not forgotten the compression test adapter, can I give it to you at the Griffin, end of May meeting?
Don't ask me, I just got here myself!
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 16 guests