there is a oil drip coming from behind the front sprocket,
maybe the gasket on the casing behind the sprocket,
has anybody got a diagram of that area to make it easier to see what should be there ?
anybody had this problem before?
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
leak at sprocket cover
Moderators: KeithZ1R, chrisu, paul doran, Taffus
There is a very thin o-ring which is often overlooked behind the sprocket on the sprocket shaft.
Remove the tab washer and undo the sprocket nut (hold down on rear brake).
Behind the sprocket you will be able to remove a ground steel sleeve. You will see it has a small chamfer on the inside which is where an o-seal should be seating. It is very hard to see as it is very thin.
RegardZ.
Remove the tab washer and undo the sprocket nut (hold down on rear brake).
Behind the sprocket you will be able to remove a ground steel sleeve. You will see it has a small chamfer on the inside which is where an o-seal should be seating. It is very hard to see as it is very thin.
RegardZ.
Garn (Sydney) Z1, Z1A, Z1B and Z900-A4
Who is online
Users browsing this forum: No registered users and 16 guests