Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Now 2 & 3 not firing

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
kwaka
Regular Poster
Posts: 68
Joined: 31st Jul 2007

Now 2 & 3 not firing

#1 PostAuthor: kwaka » Wed Jun 22, 2011 10:54 am

I took Pauls advice and tried to swap leads 1&4 because 4 wasn,t firing, but the leads are too short. So after replacing them, i started the bike and both 2&3 arn't firing, Does anyone have any idea? :??
Top
69chris
Regular Poster
Posts: 83
Joined: 11th Jun 2011
Location: swindon, wiltshire

#2 PostAuthor: 69chris » Wed Jun 22, 2011 11:07 am

i has similar problems with my 11R yesterday, one minute it had no spark at all, then it'd fire on 1/4, then on all 4, then only on 2/3......

it was the connector plug from the ign pick ups, it all looked ok but once i pulled it apart i could see it was full of horrid green corrosion !!!!

double check all connectors 1st, it could be something nice and simple :)
Top
User avatar
PAULJAC47
Hardcore
Hardcore
Posts: 3266
Joined: 31st Aug 2008
Location: WOLVO WEST MIDS ENGLAND

#3 PostAuthor: PAULJAC47 » Wed Jun 22, 2011 5:39 pm

Swap the coils over and see what happens,did you fit new ht leads or use the originals?
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."
-Han Solo

You can't polish a turd, but you can roll it in glitter

Salad is what real food eats.
Anon

PUM 673
Top
kwaka
Regular Poster
Posts: 68
Joined: 31st Jul 2007

#4 PostAuthor: kwaka » Sun Jun 26, 2011 2:48 am

G'day fellas, now i'm not even able to get the bike to fire up at all. The connectors seem ok. I've checked the primary windings and geat a reading of 4 ohm, but the secondary windings give me no reading at all, are my coils cactus?
Top
User avatar
Pigford
Hardcore
Hardcore
Posts: 13314
Joined: 2nd Jan 2006
Location: North Dorset

#5 PostAuthor: Pigford » Sun Jun 26, 2011 8:09 am

If 1 & 4 weren't working - then you swapped the leads with 2 & 3, and they stopped working - its gotta be coils (or slim chance of 2 x duff leads/caps) :!:
And on the 7th day... Zeds were created!
Top
kwaka
Regular Poster
Posts: 68
Joined: 31st Jul 2007

#6 PostAuthor: kwaka » Sun Jun 26, 2011 8:19 am

Managed to get it going, sprayed every connector i could find and threw in another set of plugs :D . Someone mentioned putting HT leads on, is it possible to replace the leads only?
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: Google [Bot] and 17 guests