Just got an RD400C..... its got Newtronics (Pirhana) ignition... Tried to set timing by manual to 2.3mm BTDC, and she run good til 4/5000rpm, then power dropped off.. to retarded. Re-set to as was.. about 5/6mm BTDC and OK. Now the RD400 is supposed to be 2.3mm, and double checked dial gauge settings... spot on! What am i doing wrong???
2 strokes don't have advance curves do they???? Worried she may hole a piston, or 2!!!:confused:
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Ignition timing... RD400.. by dial gauge - I know its not a blinkin' ZED... but...
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Who is online
Users browsing this forum: Google [Bot] and 15 guests