Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

tacho oil seal

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
wayno
100Club
100Club
Posts: 449
Joined: 15th Nov 2009
Location: swansea

tacho oil seal

#1 PostAuthor: wayno » Mon Dec 14, 2009 5:26 pm

how the hell do you fit a new one??? seems too tight
Top
phil churchett
Hardcore
Hardcore
Posts: 3009
Joined: 28th Mar 2003
Location: Warwickshire

#2 PostAuthor: phil churchett » Mon Dec 14, 2009 6:36 pm

They are tight, ensure you have got all of the old seal out.
Four pipes rule, anything else is second best.
Top
wayno
100Club
100Club
Posts: 449
Joined: 15th Nov 2009
Location: swansea

#3 PostAuthor: wayno » Mon Dec 14, 2009 7:24 pm

yes, got all of the old one out, only bare metal left
Top
User avatar
coldsummer
Hardcore
Hardcore
Posts: 3211
Joined: 29th Jun 2009
Location: Berkeley

#4 PostAuthor: coldsummer » Mon Dec 14, 2009 7:44 pm

Try heating up the housing with a hair drier and apply a small amount of oil on the outer face of the new seal. Not sure if this is correct but it worked a treat for me when I replaced my fork seals. Also make sure you haven't damaged the housing when you removed the old seal. Good luck :wink:
Top
wayno
100Club
100Club
Posts: 449
Joined: 15th Nov 2009
Location: swansea

#5 PostAuthor: wayno » Mon Dec 14, 2009 8:31 pm

think i may have found the reason its so tight, looking around for a complete unit and found this http://www.americanclassix.com/parts/new13/IMG_0154.jpg
which is what was fitted to the bike, and i bought a new seal from zpower which i presume is to fit this https://www.z-power.co.uk/merchantmanag ... p?pID=1134 dont know which is the correct for a z1000
Top
phil churchett
Hardcore
Hardcore
Posts: 3009
Joined: 28th Mar 2003
Location: Warwickshire

#6 PostAuthor: phil churchett » Mon Dec 14, 2009 9:20 pm

Seal should be the same.
Four pipes rule, anything else is second best.
Top
kev edwards
Hardcore
Hardcore
Posts: 1487
Joined: 3rd Apr 2009
Location: leverington UK

#7 PostAuthor: kev edwards » Wed Dec 16, 2009 9:33 am

the first one is the type they were made with,
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 16 guests