Page 1 of 1
5/8" Offset sprocket
Posted: Fri Mar 27, 2009 10:57 am
Author: zed1015
Wanted - 5/8" (15mm) offset, 17t , 630 pitch front sprocket with bearing nose for zed 9/1000. Or 19t ,530 pitch with bearing nose. Don't mind s/h in good nick.
Posted: Sat Mar 28, 2009 11:18 am
Author: Keefleaf
I think a Gpz 750 turbo drive sprocket might do it,worth a check.
Sproket
Posted: Sat Mar 28, 2009 4:31 pm
Author: greenlaningxt
You can get a billet one of Debben.
I have a 630 16 tooth one on the Harris, he did not think I would get away with the 17 tooth.
I have Hydralic clutch but still think I might try a 17.
What you fitting it to, whats the tyre and rear sproket size?
The GPZ one is offset but only 15 tooth, I have one somewhere, not been able to find any bigger standard type.
Let me know if you do find one!
Posted: Sat Mar 28, 2009 5:52 pm
Author: zed1015
Already spoke to debben's (which is where i normally get them) and they say 630 offsets are now unavailable. 530's over 17t with bearing nose are special order at £100 +. I have a 17t, 630 pitch with 5/8" offset on the wakisaki with hydraulic clutch with no clearance issues. May have to go 18t without the bearing nose as a last resort and not use my outrigger bearing.