Page 1 of 1
Replacement engine cover screws
Posted: Mon Mar 02, 2009 6:49 pm
Author: Robw
I need to replace all the screws that hold on the clutch cover etc, I know MandP do alloy screw sets, but ideally I am after stainless.
Any suggestions
Cheers Rob
Replacement engine cover screws
Posted: Mon Mar 02, 2009 7:04 pm
Author: Mark Stratton
Rob try
www.inoxgrp.co.uk they normally can help and their gear is top quality.
Posted: Mon Mar 02, 2009 7:05 pm
Author: phil churchett
Helped these out a few years ago with sizing bolts/screws for Zeds.
Very helpful guy, [sorry can't remember his name].
http://www.inoxgrp.co.uk/homepage.htm
Posted: Mon Mar 02, 2009 7:11 pm
Author: Robw
Cheers guys, will do.
Rob
Posted: Mon Mar 02, 2009 7:16 pm
Author: Steve Cooke
Look up a company called A2 / A4 Fixings they have them all, as long as you have the sizes from a parts manual or somewhere. Also if you're changing to socket caps there's no problem, but if you want Phillips type heads to keep along original lines be aware that the heads on stainless ones are often larger than standard Kawasaki ones.
Posted: Mon Mar 02, 2009 8:36 pm
Author: Taffus
John Kemp, very helpfull knows his stuff too
robw
Posted: Mon Mar 02, 2009 9:07 pm
Author: compo z1r
phil denton from CMM mag do them in stainless or will if you ask.
Re: robw
Posted: Tue Mar 03, 2009 11:15 am
Author: Pasc
compo z1r wrote:phil denton from CMM mag do them in stainless or will if you ask.
Make sure you are sitting down before looking at his prices
