Page 1 of 1
Low profile crackcase breather
Posted: Thu Jan 01, 2009 2:29 pm
Author: Big Fluff
Anyone have one to sell ?
I've had to 'cock' the HSR carb on the turbo to miss the breather.
I know Debbens do them for a reasonable price, but as usual I thought I'd see if any members have one up for grabs first.
Ta
Posted: Thu Jan 01, 2009 5:03 pm
Author: Rich
GPZ ones do the same job and are a fraction of the price, alternatively don't you have a lathe?
Posted: Thu Jan 01, 2009 5:07 pm
Author: Big Fluff
Rich wrote:alternatively don't you have a lathe?
I do indeed Rich, but there's not enough wall thickness to machine a groove further up for the 'O'-ring.
I'll price a GPz one up then. I take it you mean the B1/B2 model
Cheers, Will
Posted: Thu Jan 01, 2009 5:17 pm
Author: london calling
Not sure if it's allowable to fit GPz parts to a round cam cover engine
Posted: Thu Jan 01, 2009 5:19 pm
Author: Rich
I meant make one from a piece of 12mm alloy plate. real easy to turn up, offset stub for breather out - tap 1/4npt, recess for the mounting bolt, recess internally, put in the o-ring groove.