Z1OwnersClub GB

i need a right hand side caliper for my z1,i say the right hand side,as you are sitting on it,just won some forks on ebay,now need brakes,someone must know were there is one.

Z1 forks always have the fitting for 2 brake calipers ? Z-Power do the complete kit to change from single to double disc !

F ing expensive though !

Is it a Z1 or Z900 ?

its a 1973 z1 900.ive got the forks to have twin calipers now,just need the right hand side one as you look forward over handle bars.

What forks did you have before as all Z1s , Z900s have mountings for two calipers !

Hi Do you need a calliper with a hose or steel pipe
Regards Mick.

You don't actually need the entire caliper. All you need is the carrier, PMC make a repro carrier that retails here for around 9000yen. Then you will need the right hand pipe which is also still available from Kawasaki...then of course the rubber hoses if you don't already have them.

I have converted my Z1B to twin Discs

You will need
RH caliper mtg Brkt - Z1 Enterpises do them
additional caliper & disc
Dual brake hose splitter & brake stop lamp switch assembly
additional hose & metal pipe (from splitter to caliper )
RH hose brkt - Mounts between forks and front fender
5/8 bore master cylinder as the single disc one is not up to operating 2 discs

Try this !

http://cgi.ebay.com/ebaymotors/KAWASAKI ... ccessories

struthe lads,do i need a better paying job,i think i need the one with iron pipe,the forks i have are off a z thou ,just got a set of forks with the chrome reflectors on ebay,and would like the caliper on the usa ebay,as that one would pair up to the one i already got.