Page 1 of 2
Z1000-A1 Handlebars
Posted: Wed Dec 28, 2016 9:02 pm
Author: DogsbolloxofZ1B
Does anyone have or know where I can buy a
genuine set of stock handlebars for a Z1000-A1?
Doing another restoration😳
Cheers Mike
Posted: Thu Dec 29, 2016 8:41 am
Author: 000zeds
I did get a set from Z-Power but it was many years back but you never know your luck
Posted: Thu Dec 29, 2016 10:52 am
Author: wilsonsjw11
Mike,
Do the Z1000A1 handlebars have the hole in them to retain the right hand switch gear as I have a set that are exactly as Z1 but minus the locating hole.
Regards
Steve
Posted: Thu Dec 29, 2016 11:15 am
Author: z1bman
Posted: Thu Dec 29, 2016 1:32 pm
Author: wilsonsjw11
Mike,
Looking at images on the Zpower link the ones I have are definitely not Z1000A1.
Regards
Steve
Posted: Thu Dec 29, 2016 8:11 pm
Author: DogsbolloxofZ1B
wilsonsjw11 wrote:Mike,
Looking at images on the Zpower link the ones I have are definitely not Z1000A1.
Regards
Steve
Hi Steve,
Thanks for checking. Z1Bman has posted a link to
them on Daves website.
cheers Mike
Posted: Thu Dec 29, 2016 8:13 pm
Author: DogsbolloxofZ1B
z1bman wrote:https://www.z-power.co.uk/merchantmanager/product_info.php?products_id=2188
Thanks. I couldn't fibd them on the site when I checked.
Cheers Mike
Posted: Fri Dec 30, 2016 6:45 pm
Author: becker
If still looking for some - replaced the high bars on my A1 with some flatter ones - won't be putting them back on, so yours if you want?
Posted: Sat Jan 07, 2017 9:09 pm
Author: DogsbolloxofZ1B
becker wrote:If still looking for some - replaced the high bars on my A1 with some flatter ones - won't be putting them back on, so yours if you want?
Hi Becker,
Thanks I'd def like them. Please let me know
cost inc postage to PO18 8UQ
Cheers Mike
Posted: Sun Jan 08, 2017 8:31 pm
Author: becker
DogsbolloxofZ1B wrote:becker wrote:If still looking for some - replaced the high bars on my A1 with some flatter ones - won't be putting them back on, so yours if you want?
Hi Becker,
Thanks I'd def like them. Please let me know
cost inc postage to PO18 8UQ
Cheers Mike
Mike,
Some photos of the handlebars I have - can't remember which was the Z1000 - think its the ones with the drilled holes in - chrome is good condition and both are straight as far as I can tell - you can have either - shall we say £15+£5 p+p?
Posted: Sun Jan 08, 2017 9:02 pm
Author: z1bman
becker wrote:DogsbolloxofZ1B wrote:becker wrote:If still looking for some - replaced the high bars on my A1 with some flatter ones - won't be putting them back on, so yours if you want?
Hi Becker,
Thanks I'd def like them. Please let me know
cost inc postage to PO18 8UQ
Cheers Mike
Mike,
Some photos of the handlebars I have - can't remember which was the Z1000 - think its the ones with the drilled holes in - chrome is good condition and both are straight as far as I can tell - you can have either - shall we say £15+£5 p+p?
those don.t appear to have the hole between the handlebar clamps the switch wiring exits from ? or the entry of the wiring from the switch? the hole that is shown in the photo is to locate the switch
bars
Posted: Mon Jan 09, 2017 12:00 am
Author: 8 Valve Mark
I'll take a pair Becker, whichever ones mike doesn't go for.. cheers mark[/b]
Posted: Mon Jan 09, 2017 3:35 pm
Author: tlc
A1 bars have an extra section in the middle to reinforce where the hole for the wiring comes out.
Posted: Mon Jan 09, 2017 3:50 pm
Author: z1bman
this is what they should look like
http://www.ebay.it/itm/301806357168
Posted: Mon Jan 09, 2017 8:23 pm
Author: DogsbolloxofZ1B
I thought there was something missing.. getting old😄
Absolutely right they should have that thicker mid section.
Dohhhh
