Page 1 of 1
L/H engine mounting bolt
Posted: Fri Aug 12, 2016 10:13 pm
Author: Bill Newman
As title says, l/h engine mounting bolt for Z1A. 12 x 71mm. Not sure of the thread - bolts into a pear nut underneath the gearbox.
Posted: Fri Aug 12, 2016 11:37 pm
Author: floydsz1
Posted: Sat Aug 13, 2016 4:55 pm
Author: chrisu
Should have one bill
Posted: Sat Aug 13, 2016 5:30 pm
Author: Bill Newman
Thanks Chris.
It is for that really straight/original Z1A. I was hoping to be able to get an original bolt as everything else is original on the bike. I had a spare pear nut but not the bolt.
I only noticed it was missing after it passed an MOT😳
Have sent off for the reg - now waiting for the number plate so I can get it on the road.
Posted: Sun Aug 14, 2016 1:11 pm
Author: chrisu
Back in the uk tomorrow
Remind me then...
Old age you know
Posted: Tue Aug 16, 2016 3:18 pm
Author: chrisu
bolt located - with tear drop.
even stamped No 7 !
Posted: Tue Aug 16, 2016 3:27 pm
Author: tlc
Be careful there.
A #7 may be for a different bike. My Thou' had nought but a raised dot.
Posted: Tue Aug 16, 2016 5:03 pm
Author: chrisu
It's for a z1a
Bill will advise if it's wrong