Page 1 of 1
Gpz1100 Unitrac
Posted: Mon May 09, 2016 4:43 pm
Author: 1962royp
Guys im building a 1100 unitrac
Got a frame swinging arm back wheel and an engine
Got some forks a front mud guard.
I need a loom and electrics and panels foot peg brackets
also calipers.
Has any body got some clearout bits.
Im on an econo drive LOL
I do have some cash.
I also have some 1000J forks I could swap.
Im not proud i do like a challenge in restoring.
I dont want much do i
I could be interested in an old rolling chassis if someone has one.
Posted: Mon May 09, 2016 7:07 pm
Author: garyd
I've got an old A1 loom you can have gratis.
PM your addy.
Posted: Mon May 09, 2016 7:16 pm
Author: tlc
You're welcome to anything off this.
Most of it is scrap but as I say…
unitrac
Posted: Mon May 09, 2016 7:44 pm
Author: 1962royp
Thanks Guys for the replies
Gpz 1100 unitrac
Posted: Wed May 18, 2016 7:45 pm
Author: 1962royp
Thanks for the Parcel Gary D much appreciated..
Posted: Wed May 18, 2016 9:15 pm
Author: Coose
Try Pete Stansfield at Yorkshire Rally Spares. He broke a sorted one last year and will no doubt have a few bits kicking about.
Gpz 1100 unitrac
Posted: Wed May 18, 2016 9:24 pm
Author: 1962royp
Will do cheers
Posted: Thu May 19, 2016 4:21 pm
Author: garyd
Gpz 1100 unitrac
Posted: Fri May 20, 2016 9:17 pm
Author: 1962royp
I thought the extension on the front one was class.
It must be for something else.
Posted: Sat May 21, 2016 9:54 am
Author: Al
I may have a front wheel.
Shall i look?
AL
Gpz 1100 unitrac
Posted: Sat May 21, 2016 4:28 pm
Author: 1962royp
Yes please
need a spindle and speedo drive too
If its got discs even better.
Posted: Sun May 22, 2016 9:56 am
Author: Al
18 x 2.15 front Uni 1100 wheel. Red, with discs no bolts, bearings and circlips, speedo drive ring, spindle with nuts, speedo gearbox.
Will be at Oulton Park in two weeks and Cadwell in another month from there if either help on delivery. Wheel is FOC delivery is down to you.
AL
gpz1100 unitrac
Posted: Fri Jun 03, 2016 11:45 am
Author: 1962royp
Gents I have just collected a package from Mr Zorded full of usefull bits.
Thanks again all of you who have donated to the cause.
Ill post pics in a bit with all i have and as it goes along.
Posted: Fri Jun 03, 2016 9:14 pm
Author: Al
No problem Roy but you should probably thank garyd as it probably came from the same bike he sent you a load of stuff from.
AL
