Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

RH caliper Z900A4

Post all your wanted ads here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
User avatar
Taffus
Moderator
Posts: 4159
Joined: 30th Aug 2007
Location: .21 club

RH caliper Z900A4

#1 PostAuthor: Taffus » Mon May 09, 2016 8:53 am

Hi
Anyone got a right hand brake caliper for a z900a4 they want to sell?
(\__/)
(='.'=)
(")_(")Image
Top
gray
100Club
100Club
Posts: 198
Joined: 22nd Mar 2006

#2 PostAuthor: gray » Sun Jun 19, 2016 12:51 pm

I've got 2 dismantled z1000 A1/2 callipers and 2 solid discs, discs are fine - were on my 900A4 but took them off cos there MUST be better way to brake in the wet. Calipers will need extensive refurb ( and you could put s/s pistons in them at the same time)
gray
Top
garyd
Hardcore
Hardcore
Posts: 2558
Joined: 11th Jun 2011
Location: West of London

#3 PostAuthor: garyd » Sun Jun 19, 2016 2:40 pm

Got a pair with the splitter/hoses still attached.
In original condition..i.e missing bits of paint.

Not 100% sure if they are A4 or Z1000. Is there any difference?

If you don't mind a bit of refurbing you can have the whole lot for £25.
Top
User avatar
Garry.L
Hardcore
Hardcore
Posts: 2516
Joined: 11th Jun 2011
Location: Cheapest Cheshire

#4 PostAuthor: Garry.L » Mon Jun 20, 2016 10:34 am

garyd wrote:
Not 100% sure if they are A4 or Z1000. Is there any difference?



A4 and Z1000 A1 calipers are the same. Z1000 A2 calipers were moved to the rear of the fork legs so are slightly different as the bleed nipple was moved to the front of the caliper from the side. They will still fit though.
ʎɐqǝ uo pɹɐoqʎǝʞ ɐ ʎnq ı ǝɯıʇ ʇsɐן ǝɥʇ sı sıɥʇ
Top
User avatar
Taffus
Moderator
Posts: 4159
Joined: 30th Aug 2007
Location: .21 club

#5 PostAuthor: Taffus » Mon Jun 20, 2016 11:28 am

All sorted now, 2 thin z1000 disks plus an a4 caliper with righthand caliper mount from a z1000.
Bleeding was a pain even with a mighty vac.

Just got to get used to them now.....
(\__/)

(='.'=)

(")_(")Image
Top
King of Kings
100Club
100Club
Posts: 431
Joined: 31st Mar 2014
Location: Runcorn

#6 PostAuthor: King of Kings » Mon Jun 20, 2016 6:48 pm

The A2 caliper piston size dropped to 38mm from the A1 41mm! Then went back to 41mm for the Mk2/A3 for 79. :??
Top
Post Reply

Return to “Wanted Adz”

Who is online

Users browsing this forum: No registered users and 7 guests