Page 1 of 1
Oil cooler small
Posted: Mon Feb 01, 2016 6:26 pm
Author: Al
Looking for a small (smallest possible) oil cooler for the J
Its got an ancient Unitrak one just now but i want to replace the body as its' never looked like it would remain oil-tight for ever.
Works fine for now but want to be safe for track riding as an 'oil down' wont be good for me or 149 others on the day!!
AL
Posted: Mon Feb 01, 2016 7:47 pm
Author: Ginger Bear
Al,
I've had a couple from this lot...
Not sure if this will be bigger than you want.
10 Row with plumbing...
http://www.ebay.co.uk/itm/BEK149-MGB-19 ... 1450704364
10 Row on its own.....
http://www.ebay.co.uk/itm/BEK052-CLASSI ... 1793657049
7 Row from China.
....
http://www.ebay.co.uk/itm/UNIVERSAL-ENG ... SwZG9Wi3XT
Got this too, if it's any good to ya?
Posted: Wed Feb 03, 2016 9:40 pm
Author: Al
Thanks Steve i'll give it a dose of looking into.
Thankyou for the bracket suggestion i will see what happens and take it from there.
With my existing one i made a steel bracket from scratch as i wanted it mounted top and bottom by something that would not suffer from vibration.
So far its been good,..... ish.
Al
bracket.
Posted: Thu Feb 04, 2016 9:53 am
Author: KWACKERZ1
AL, Steve,
If Al does not want the bracket, I could use it on the Harris if thats ok.
Al I will be replacing my standard gpz cooler as I want a bigger one.
So your welcome to my standard kwacker one if its any use.
Also have a word with Hooper man he has a square cooler spare that would fit in your fairing.
This sort of thing.
http://www.ebay.co.uk/itm/13ROW-10AN-PO ... Sw4SlV8jiW
Posted: Thu Feb 04, 2016 9:34 pm
Author: Al
Hooper man to the rescue, our own tame super hero.
But seriously if Steve wants to extend the same generosity, i have no issue or specific interest in it because i will likely make something in steel as before.
Over to you GB and thank you again for the offer.
AL
Posted: Fri Feb 05, 2016 6:54 am
Author: Ginger Bear
Phil,
PM me your address............ You can buy me a couple of 'shandies' next time we meet.
Posted: Fri Feb 05, 2016 7:32 am
Author: steve bowdler
