I am after fitting an aftermarket front sprocket cover as I am using a different clutch set up, so I don't need the actuator. Has anybody used a PMC one or similar? i have spotted one from an American Company called Precision Metal Fabrications, are they any good?
Cheers Rob
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Aftermarket front sprocket cover
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Aftermarket front sprocket cover
Z1000R/ZRX, RD 125LC, Zx7r , Endurance racer
D&G,also american,I think;
http://www.dgchassis.net/Outer%20bearin ... pport.aspx
Or make one yourself,after all its just a plate of aluminium with some holes drilled in it. Im making one at the minute.
http://www.kzrider.com/forum/11-project ... ?start=120
No idea what Im doing but it seems straight forward enough and its a lot cheaper than sending off to america for.
http://www.dgchassis.net/Outer%20bearin ... pport.aspx
Or make one yourself,after all its just a plate of aluminium with some holes drilled in it. Im making one at the minute.
http://www.kzrider.com/forum/11-project ... ?start=120
No idea what Im doing but it seems straight forward enough and its a lot cheaper than sending off to america for.
Who is online
Users browsing this forum: Bing [Bot] and 5 guests