Z1OwnersClub GB

Posted: **Sun Feb 01, 2015 8:02 pm**

Wanted Lockheed brake calipers or may consider other to upgrade brakes yo suit z1000 (Front and rear)

Posted: **Sun Feb 01, 2015 8:13 pm**

I think the modern equivalent of Lockhead calipers are AP racing calipers ref CP2696. Andover Norton cheapest stockist in UK.

Posted: **Sun Feb 01, 2015 9:36 pm**

I have them fitted to both my ELR and endurance racer, best brakes I have ever use, no fade around tracks
Rob

Posted: **Sun Feb 01, 2015 9:47 pm**

best brakes ever

Posted: **Mon Feb 02, 2015 10:32 am**

I have a pair of AP Lockheed calipers. CR2696 twin piston. Came with my Harris in a big box of bits. Can't guarantee seals etc but pistons do seem to move. You will need pads/pins. They are AP Lockheed branded so are old (current ones only have AP in the casting).

Â£100 the pair posted if interested. There is also a matching master cylinder but it has no break lever. Again old as full metal casting including fluid reservoir and cap. New ones are plastic. Can add this for extra Â£50. Levers, pads etc available from Dennis Trollope Racing in Bristol.

Posted: **Mon Feb 02, 2015 1:26 pm**

Martin, if Stempy does not have them can I HAVE FIRST SHOUT please

Posted: **Mon Feb 02, 2015 1:34 pm**

Poo

beaten by a couple of minutes.

Can I have second first shout?

Posted: **Mon Feb 02, 2015 2:15 pm**

Martin PM Sent

Posted: **Mon Feb 02, 2015 4:08 pm**

Folks, someone else was even quicker off the mark with a PM! Rick obviously gets first shout but here are the offending items. What you see is what you get. Not tried, tested or fitted. I suspect OEM on a Norton or Triumph? Please advise:

Posted: **Mon Feb 02, 2015 6:41 pm**

Deal done to Mr Stemp!

Posted: **Mon Feb 02, 2015 8:10 pm**

Aaaargh B******. I should have put a wanted post up.

:lol: