Page 1 of 2
Engine mounting bolts
Posted: Mon Dec 08, 2014 10:06 am
Author: Richard Q
My Z900 has threaded bar which has tarnished rather a lot, taking place of the three bolts which hold the engine in. 165mm, 250mm and 310mm.
They are all a little too short and are on the end of their threads, so not good. As I would like to fit some engine bars, the front one is just not long enough, 304mm from the seized on dome nut to the end.
So, I was looking for some stainless bolts, 165, 250 and perhaps a little longer than 310mm, say 320.
Anyone got any? can I use stainless? are they supposed to be bolts or 10mm studding?
So many questions
Posted: Mon Dec 08, 2014 12:09 pm
Author: z1bman
Posted: Mon Dec 08, 2014 8:42 pm
Author: ZedHead
z1bman wrote:http://www.saisei-europe.com/Shop/Products/p/engine-mounting-hexagon-bolt-set-steel/PageIndex/12/SearchValue/kawasaki
These have just arrived in stock, just need to update the site.
Thanks
Dave
Posted: Tue Dec 09, 2014 10:50 am
Author: Richard Q
Cheers
I was kinda looking for stainless though.
Have ordered a pack of 3 of the long ones, and packs of 5 of the shorter ones. Anyone want any, give me a shout
I have spares.
Richard
Posted: Tue Dec 09, 2014 2:13 pm
Author: KeithZ1R
Posted: Tue Dec 09, 2014 3:02 pm
Author: Richard Q
Bit late now
They're for a Z1000J - would they have fitted the KZ900?
Richard
Posted: Tue Dec 09, 2014 3:07 pm
Author: KeithZ1R
I have no idea
I just provided information that I thought may or may not be useful in your search, if you look into the Ebay shop they have lots of SS kit that may or may not be of use
Posted: Tue Dec 09, 2014 3:36 pm
Author: Richard Q
Oh ok
I have managed to get some SS ones with the longer one being a little over length to fit some engine bars.
Thanks anyway
Cheers
Richard
Posted: Tue Dec 09, 2014 5:05 pm
Author: wheelysteve
Richard, where did you get your s/s long bolts from? I've got some crash bars to fit and need extended bolts to suit.
Thanks, Steve
Posted: Tue Dec 09, 2014 6:28 pm
Author: Richard Q
Hi Steve
I got them here
http://www.accugroup.co.uk/
They're not here yet so I don't know what they're like. It's only the front one that I got a little longer @ 320mm
I have a couple of spares if you need one
Richard
Posted: Sat Dec 20, 2014 3:27 pm
Author: sprint
Richard Q wrote:Hi Steve
I got them here
http://www.accugroup.co.uk/They're not here yet so I don't know what they're like. It's only the front one that I got a little longer @ 320mm
I have a couple of spares if you need one
Richard
How did you get over the min order?
Posted: Sat Dec 20, 2014 6:09 pm
Author: Richard Q
I didn't, I bought three. Do you want to buy one ?
Posted: Sat Dec 20, 2014 6:34 pm
Author: jimmock
Richard Q wrote:Cheers
I was kinda looking for stainless though.
Have ordered a pack of 3 of the long ones, and packs of 5 of the shorter ones. Anyone want any, give me a shout
I have spares.
Richard
YEEEEESSSSSSSSSSSSSSSSSS !!!!!
Posted: Wed Feb 18, 2015 9:34 am
Author: sprint
Richard Q wrote:Cheers
I was kinda looking for stainless though.
Have ordered a pack of 3 of the long ones, and packs of 5 of the shorter ones. Anyone want any, give me a shout
I have spares.
Richard
Do you still have some st/st engine bolts surplus to requirement? If so what lengths do you have?
Andy
Posted: Wed Feb 18, 2015 10:10 am
Author: Richard Q
Hi Andy
Yes I still have some left
The front one is 320mm, 10mm oversize which is great if you're fitting engine bars to it.
There's a 250mm, and a 170mm as well. The 170 should be 165mm but I couldn't get one of those, so you will have to chop the last 5mm off, or I can do that for you if you like.
So you'll get 3 Stainless bolts 320mm, 250mm and a 170mm, and three stainless dome nuts to suit. I can do it for £25.00 plus £5.00 carriage to mainland UK.
How's that sound?
Richard
PS I've answered you PM as well
