Z1OwnersClub GB

Hi all, I require several standard parts for a z1100 st (1981).
I don't know if any of the parts double up on different models???
1, front mudguard = SORTED
2, centre stand
3, centre stand lock/bracket = SORTED
4, side panel badges
5,'kawasaki' cover that fits on the bottom yolk area, between the 2 fork legs.= SORTED
I've found everything on ebay but quite pricey
so if you want to sell your spares, pm me a price, photo etc.
Also any info will be much appreciated
thanks in advance,
freddy

I will have a look.
I might have panel badges and front fork piece.

If you don't know, the A1/2 panel badges are different to the A3 badges

Here you go Fab 5 Freddy,only a pony less discount

https://www.z-power.co.uk/merchantmanag ... hp?pID=824

doebag wrote:I will have a look.
I might have panel badges and front fork piece.

If you don't know, the A1/2 panel badges are different to the A3 badges

thanks for looking and no, I didn't know the badges were different.
in what way please?
Cheerz freddy

london calling wrote:Here you go Fab 5 Freddy,only a pony less discount

https://www.z-power.co.uk/merchantmanag ... hp?pID=824

a pony
you do talk funny down sowf
cheers jack for the link.
freddy

Single side panel badge ebay 151470344643 (sorry but bloody iPad won't cut and paste link.

london calling wrote:Here you go Fab 5 Freddy,only a pony less discount

https://www.z-power.co.uk/merchantmanag ... hp?pID=824

Probably fairly common across Kawasaki range and on cheaper models...unless it's down sarf (further south and east bonjour:lol: )

http://www.ebay.co.uk/itm/151470344643? ... 26_rdc%3D1

z650freak wrote:Single side panel badge ebay 151470344643 (sorry but bloody iPad won't cut and paste link.

thanks for looking paul, but you've lost 100cc
I think your right about the 'kawasaki' part, I just don't know what else they fit
Cheerz freddy

freddyz1r wrote:http://www.ebay.co.uk/itm/151470344643?ru=http%3A%2F%2Fwww.ebay.co.uk%2Fsch%2Fi.html%3F_from%3DR40%26_sacat%3D0%26_nkw%3D151470344643%26_rdc%3D1

z650freak wrote:Single side panel badge ebay 151470344643 (sorry but bloody iPad won't cut and paste link.

thanks for looking paul, but you've lost 100cc
I think your right about the 'kawasaki' part, I just don't know what else they fit
Cheerz freddy

Ah sorry Freddy must take more care in reading the question

z650freak wrote:Ah sorry Freddy must take more care in reading the question

no worries bud, thanks for trying.
cheerz freddy

freddyz1r wrote:thanks for looking and no, I didn't know the badges were different.
in what way please?
Cheerz freddy

Well I have embarrassed myself No badges on the panels, and I cannot find a fork cover.

The difference is basically the font style of the lettering. On the A1/A2 the 0's are rounded, and all the numerals have an outline to them.
On the A3, the 0's are squared off and are flat, with no outline to them, but the Z has an outline.

Picture is of my UK A3 model

doebag wrote:The difference is basically the font style of the lettering. On the A1/A2 the 0's are rounded, and all the numerals have an outline to them.
On the A3, the 0's are squared off and are flat, with no outline to them, but the Z has an outline.
Picture is of my UK A3 model

now you've shown me the A3 badge picture I can see the difference, totally different to mine .
thanks for looking.
I new there was a couple of differences ( ignition switch, speedo drive) but I didn't know anymore
I'll post a separate picture / wanted ad for the badge. I can't find one at the moment, but I'm sure someone will know where to get 1 from.
cheerz freddy

To update,
still require a centre stand and side panel badge or badges.
thanks for the helpful info / parts.
cheers freddy