Page 1 of 1
z1 hubs + stand + swing arm wanted
Posted: Mon Sep 22, 2014 8:24 pm
Author: malmojoe
hello, I'm looking for a set of salvageable hubs (drum brake). I have the rear brake plate.
Also main stand - mine has the kicker sawn off.
Also a z1 swing arm.
Posted: Thu Sep 25, 2014 3:57 pm
Author: malmojoe
anything? Are Z650 fron hubs the same?
Posted: Thu Sep 25, 2014 9:11 pm
Author: A1John
Posted: Fri Sep 26, 2014 9:32 am
Author: malmojoe
Posted: Fri Sep 26, 2014 10:19 am
Author: RAYZ1
malmojoe wrote:anything? Are Z650 fron hubs the same?
h2 is the same as z1 rear hub
Posted: Fri Sep 26, 2014 10:39 am
Author: A1John
RAYZ1 wrote:malmojoe wrote:anything? Are Z650 fron hubs the same?
h2 is the same as z1 rear hub
The hub on an H2 is different, the cush drive rubber locating peg is in the middle on an H2 and offset on a Z1
Posted: Fri Sep 26, 2014 11:05 am
Author: malmojoe
A1John wrote:RAYZ1 wrote:malmojoe wrote:anything? Are Z650 fron hubs the same?
h2 is the same as z1 rear hub
The hub on an H2 is different, the cush drive rubber locating peg is in the middle on an H2 and offset on a Z1
worth noting down. Thanks.
The front hubs are the same though aren't they?
Posted: Fri Sep 26, 2014 11:07 am
Author: A1John
malmojoe wrote:A1John wrote:RAYZ1 wrote:malmojoe wrote:anything? Are Z650 fron hubs the same?
h2 is the same as z1 rear hub
The hub on an H2 is different, the cush drive rubber locating peg is in the middle on an H2 and offset on a Z1
worth noting down. Thanks.
The front hubs are the same though aren't they?
yes, the front hubs are the same.
Posted: Fri Sep 26, 2014 7:44 pm
Author: Jumbo
I had problems with a hub, but the physical size was the same, so I bought the rubbers for that hub with the lug in the centre and all was OK.
http://z1ownersclub.co.uk/forum/viewtop ... hlight=hub
Posted: Sat Sep 27, 2014 12:30 pm
Author: Z1parR
I have a six bolt hub Glyn .
Posted: Sat Sep 27, 2014 12:59 pm
Author: malmojoe
Geoff, sent you a PM.....I think.