Anyone got a 28mm x 1mm HSS split die I can blag/borrow/rent etc.
Only need it for 10 mins to extend the thread on a steering stem and would prefer not to pay £100 for something i'm gonna use once.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Wanted 28mm x 1 mm HSS die .
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Wanted 28mm x 1 mm HSS die .
Last edited by zed1015 on Thu Jun 05, 2014 2:20 pm, edited 1 time in total.
-
Mark Stratton
- Custard Cream
- Posts: 574
- Joined: 16th Feb 2009
- Location: Southampton
Rob
I know its not the exact pitch required but I have used Tracy Tools before and they are normally the cheapest about and really helpful when you need something different.
http://www.tracytools.com/taps-and-dies ... -15-metric
Give them a call as they might be able to source one at a decent price.
I know its not the exact pitch required but I have used Tracy Tools before and they are normally the cheapest about and really helpful when you need something different.
http://www.tracytools.com/taps-and-dies ... -15-metric
Give them a call as they might be able to source one at a decent price.
Mark Stratton wrote:Rob
I know its not the exact pitch required but I have used Tracy Tools before and they are normally the cheapest about and really helpful when you need something different.
http://www.tracytools.com/taps-and-dies ... -15-metric
Give them a call as they might be able to source one at a decent price.
Yeah! have dealt with them for years and sent them an email a few days ago.
Not from the UK but....
http://www.ebay.co.uk/itm/150648529069
£32 including P&P (I've bought stuff from this seller before and been happy).
http://www.ebay.co.uk/itm/150648529069
£32 including P&P (I've bought stuff from this seller before and been happy).
ruffle wrote:Not from the UK but....
http://www.ebay.co.uk/itm/150648529069
£32 including P&P (I've bought stuff from this seller before and been happy).
Saw that but not it's not split or HSS and there's some bad feedback about quality.
Getting desperate now so am biting the bullet and stumping up the cash for a decent one.
Maybe see if I can ebay it for a decent price or hire it out for a tenner a time to recoup some pennies once I've had my 10 minutes with it
-
firyembers
- Custard Creem
- Posts: 223
- Joined: 11th Jun 2011
- Location: Back And Loving Life In Cardiff
If you have access to a lathe,how about spinning it between centers with a drive dog and use a tip tool 60 degree external,
eBay item # 370542487363
And set up for 1mm pitch and manually cut it,take a while but cost is low..
Cheapest i came up for a die,not split was $77 from Ali Express,i have bought from them a M23 x 1 tap,came in good time 4-5 days,no contact though i did have the idea it was a scam until the tap arrived.
eBay item # 370542487363
And set up for 1mm pitch and manually cut it,take a while but cost is low..
Cheapest i came up for a die,not split was $77 from Ali Express,i have bought from them a M23 x 1 tap,came in good time 4-5 days,no contact though i did have the idea it was a scam until the tap arrived.
Life shouldn't be a journey to the grave with the intention of arriving safely in a well-preserved body, but rather to skid in sideways, cigar in one hand, beer in the other, body used up, totally worn-out and screaming, "WOO HOO, what a ride!"
Who is online
Users browsing this forum: No registered users and 9 guests