Page 1 of 1

1170 pistons and possibly the barrels

Posted: Sun Dec 22, 2013 9:40 am
Author: marve114
Just gathering info

Where could one lay his hands on a set of 1170 pistons or possibly a kit to suit a Gpz 1100 a2 motor

Posted: Sun Dec 22, 2013 7:10 pm
Author: big green bus
Debben Performance.

Posted: Sun Dec 22, 2013 7:46 pm
Author: Taffus
Gremlin
or Pitstop performance on ebay us

Posted: Sun Dec 22, 2013 8:09 pm
Author: marve114
Thanks guys

Posted: Sun Dec 22, 2013 8:15 pm
Author: z1bman

Posted: Mon Dec 23, 2013 7:46 am
Author: marve114
Thank you z1bman

I did see these but I'm pretty sure the wrist pins are the wrong size for my engine

Posted: Mon Dec 23, 2013 11:00 am
Author: zed1015
marve114 wrote:Thank you z1bman

I did see these but I'm pretty sure the wrist pins are the wrong size for my engine


Yes! Those are 17mm and you need 18mm pins.

Posted: Mon Dec 23, 2013 2:12 pm
Author: garyd
Can you enlighten me as I'm a bit confused....(Insert witty comment here)

Is your engine based on the Z1000J?

If so I thought the J and the B1/B21100s were 17mm wrist pins and it was only the Unitrack that had 18mm Wrist pins.

As always I'm happy to be correct if I'm wrong.

Gary

Posted: Mon Dec 23, 2013 2:39 pm
Author: marve114
My bike is a j-3
But I have sneakily fitted a Gpz1100a3 motor 18mm wrist pins

So I'm just gathering info on bits n bobs

Posted: Mon Dec 23, 2013 3:00 pm
Author: zed1015
garyd wrote:Can you enlighten me as I'm a bit confused....(Insert witty comment here)

Is your engine based on the Z1000J?

If so I thought the J and the B1/B21100s were 17mm wrist pins and it was only the Unitrack that had 18mm Wrist pins.

As always I'm happy to be correct if I'm wrong.

Gary


Ad does say for GPZ1100 A motor.

Posted: Mon Dec 23, 2013 4:40 pm
Author: garyd
Ad does say for GPZ1100 A motor


Alright smarty pants....we can't all read all the big words in one go.