Page 1 of 1

Z1R Fuel Tap

Posted: Sat Sep 14, 2013 2:59 pm
Author: Tonka
Need a new or working fuel tap for a Z1R as the one fitted to the bike is extremely difficult to turn on and off.

Also the filter is past it's best anyway so best to replace it

Cheers

Posted: Sat Sep 14, 2013 7:36 pm
Author: z1bman

Posted: Sat Sep 14, 2013 8:21 pm
Author: Tonka
Many thanks Paul, ordered one from the 3rd choice you gave me. Cheers

Posted: Sun Sep 15, 2013 8:59 am
Author: DavidZ1R
Hi Tonka, I have had the same problem on mine, posted a couple years ago, not alone either, I think its the fuel, stripped mine down, replaced the o ring seal, lubricated it and it was much better, still is but tight, no point now you have bought one. :)

Posted: Sun Sep 15, 2013 12:20 pm
Author: z1bman
these type of fuel taps where very stiff to operate even from new

Posted: Sun Sep 15, 2013 12:32 pm
Author: Gavin
This is a problem on Z1300's I am going to follow this As it works and cheaper than buying a new tap

Taken from the Z1300 forum

http://www.dreadsbikersite.com/Z1300/fuel_tap.htm

Posted: Sun Sep 15, 2013 3:32 pm
Author: KeithZ1R
Pull it apart and clean it put a bit of silicon on the "O" ring DONT lose the little spring that pushes the cone into the housing :oops: