Page 1 of 1
clock casings
Posted: Wed Sep 11, 2013 8:00 am
Author: kwak
hi all
i am after some Z900 / Z1000 clock casings the internals do not need to be working as i just want the outer casing and top glass as want use for my Z project
be great if some one can help
many thanks
Posted: Wed Sep 11, 2013 9:10 pm
Author: zpower
Thats the same idea as me
So if there are two sets can I have one please
Cheers,
Phil.
Posted: Wed Sep 11, 2013 9:19 pm
Author: kwak
zpower wrote:Thats the same idea as me
So if there are two sets can I have one please
Cheers,
Phil.
by all means
if we find some then we could go halfs if you want
andy
Posted: Thu Sep 12, 2013 10:03 am
Author: pertonpc
You can buy new black clock lower cases from Z1 Enterprises lads.
Black tops are not avail new as far as I know.
Chrome tops + bottoms avail new from Z Power, eBay etc.
From Mark
Posted: Thu Sep 12, 2013 10:25 am
Author: kwak
pertonpc wrote:You can buy new black clock lower cases from Z1 Enterprises lads.
Black tops are not avail new as far as I know.
Chrome tops + bottoms avail new from Z Power, eBay etc.
From Mark
hi mark
that great just what needed thank you so much
all best andy
Posted: Thu Sep 12, 2013 1:35 pm
Author: zpower
Hi,
Yes thought about that but I wanted to use the standard clock mounts with idiot lights etc.
Hmm I suppose I could fabricate something
Cheers,
Phil.
Posted: Thu Sep 12, 2013 3:10 pm
Author: pertonpc
zpower wrote:Hi,
Yes thought about that but I wanted to use the standard clock mounts with idiot lights etc.
Hmm I suppose I could fabricate something
Cheers,
Phil.
Phil,
you can use standard clock munts and idiot lights with all the products I suggested mate.
http://www.z1enterprises.com/ItemDetail ... EM58-85101
Mark
Posted: Thu Sep 12, 2013 3:24 pm
Author: zpower
Yup true dat
Maybe I was over thinking it lol
clocks
Posted: Thu Sep 12, 2013 4:21 pm
Author: kwak
this is what i want i want a complete set clocks does not mater condition as i want take original insides out and put digital instruments in there and adapt if smaller so they fit then put back together and mount etc
as i want to mount these inside and may have to make aluminum bezzel or something then fit and takes wires out bottom and put the chrome covers over so they look like original clocks from distance until you look at them face onwards if you see what i want do
