Page 1 of 1
Z1000 B C ST MKII J GPZ R etc. ignition pick up parts needed
Posted: Wed Aug 07, 2013 4:09 pm
Author: Gus
Hi Guys
I have an ignition pick up assembly that is in pieces (I don't even know if it works) and is missing one of the brown magnets sandwiched between the pick up plate and the mounting back plate.
Does anybody have a damaged set I could have the magnet off or a damaged set that nobody wants?
Thanks in advance Amigos
Gus
Posted: Wed Aug 07, 2013 4:53 pm
Author: paul doran
Gus I may have but it will be a day or two before I can check
Posted: Wed Aug 07, 2013 4:55 pm
Author: Gus
Thanks Paul.
Much appreciated.
Gus
Posted: Wed Aug 07, 2013 7:21 pm
Author: Z1parR
If Paul can't dig one out for you Gus then i've got a damaged plate which will have the bits .
Posted: Wed Aug 07, 2013 7:40 pm
Author: Gus
Excellent news.
Thanks for the offer, we'll wait and see what Paul says.
Thanks Geoff
Cheers
Gus
Posted: Sat Sep 28, 2013 10:02 am
Author: Gus
Any news Paul?
Posted: Sat Sep 28, 2013 4:42 pm
Author: Big Fluff
If all else fails, I have a complete ignition system off a Z1000J.
Sorry I won't split it but it is available.
Will
Posted: Sat Sep 28, 2013 8:19 pm
Author: ogre
if your struggling pretty sure i av one you can have
Posted: Tue Aug 19, 2014 8:02 am
Author: Gus
It's been a while.
Does anybody still have offers of a spare magnet as I borrowed a mates and tested my unit which works.
Cheers guys
Gus
Posted: Tue Aug 19, 2014 6:37 pm
Author: Z1parR
I'll take a pic and send it to you mate .
If you can use it then result it's yours
Posted: Tue Aug 19, 2014 8:15 pm
Author: Gus
Cheers for that Geoff.
Much appreciated.
I'll be away until Thursday evening so will hopefully reply then.
Cheers tha noo!
Gus
Posted: Tue Aug 19, 2014 8:26 pm
Author: Ginger Bear
Gus,
I might have what you need..... No promises though.
A pic of what you need would help me............ Then I've just got to work out where I've stashed it.
Posted: Tue Aug 19, 2014 8:47 pm
Author: z1000puddin
Gus,
Is this what you are looking for.
I have no idea what it is off
Posted: Wed Aug 20, 2014 8:31 am
Author: Gus
That looks like the badger.
Not sure how to tell if there is a difference between the Z1000 models and say 650/750 systems.
The wires on mine from the pulse coils are
Black/blue = left coil
Red/yellow = right coil
It's one of the brown half moon magnet sandwiched between the two plates that I need.
Wouldn't want to break a working system though.
Cheers
Gus
Posted: Wed Aug 20, 2014 8:58 pm
Author: z1000puddin
Gus,
You can have mate, as it is no good to me.
PM me your address & I will get it in the post.
Stu
