Z1OwnersClub GB

i have one broken top right fin on my elr cylinder head does anyone have a damaged head they wouldnt mind liberating a fin from?
thanks

A GOOD ALUMINIUM WELDER /FABRICATOR SHOULD BE ABLE MAKE ONE

ok bud,thought if I could get hold of one I could shape it to fit and then just a case of getting it welded

ive a damaged head some were ,which fin are you after

neilbarrett wrote:ive a damaged head some were ,which fin are you after

nice one ,just had a look to refresh my memory,as sitting on the bike it is the right hand side bottom cylinder head fin that is missing the whole front corner

I will have one if you do not get sorted

big green bus wrote:I will have one if you do not get sorted

thanks,will wait to see if Neil has one

big green bus or neil have you got a fin you can send me? here is a pic of the offending item,I will be happy to paypal you some beer tokens in exchange

sorry forgot about it,was down me lockup tonight as well,will try and check before the weekend

neilbarrett wrote:sorry forgot about it,was down me lockup tonight as well,will try and check before the weekend

thanks mate

I made a couple for my old ELR head - just got some alloy sheet (either 2 or 3mm, can't remember now?) and cut it out - filed it and got Griffs in bristol to weld it on - simples

Pigford wrote:I made a couple for my old ELR head - just got some alloy sheet (either 2 or 3mm, can't remember now?) and cut it out - filed it and got Griffs in bristol to weld it on - simples

agreed it does not have to be a Finn from another head if your welder knows what he is doing he will have the material to do the job. the guy i use has been known to build it up with weld if there's not that much of the aluminium missing