Page 1 of 1
Wanted Z1000A2 front brake master cylinder
Posted: Mon Apr 01, 2013 9:20 pm
Author: Reecy
As the headline says..............
Can anyone on here help out???
I need a good condition Z1000A2 front brake master cylinder
thanks in advance
Reecy
Posted: Mon Apr 01, 2013 10:00 pm
Author: Mark Tiller
zpowe do a good Z1 style pattern in 1/2 or 5/8 bore
Posted: Tue Apr 02, 2013 9:00 am
Author: Jay1969
I've got a kz1000 B2 front master cylinder if no-one else has one for you,
busy at the moment, but will photograph it when I get home
for you to look at and decide, hope that helps...
Regards,
Jay.
master cylinder
Posted: Tue Apr 02, 2013 12:50 pm
Author: andy c
Not A2 but may get you running
Im sure I had a a2 one somewhere ? will have a good look tonight
a2 front
Posted: Tue Apr 02, 2013 2:58 pm
Author: andy c
Found this not good but may help
Posted: Tue Apr 02, 2013 6:27 pm
Author: Z1parR
Obviously i will hold back and let Reecy have the pick of the litter , but i'm in need of a decent one for my 650 , it's got a ZRX one on it at the mo .
z1000 master cyl
Posted: Tue Apr 02, 2013 7:51 pm
Author: Reecy
Well thanks v much for all of the replies
Andy C's is exactly the one that I need-Andy, let me lknow how much you want for it posted and i'll get a payment across to you
thanks again for the other offers
All the best
Reecy
Ps off you go Geoff fill your boots
Posted: Tue Apr 02, 2013 8:38 pm
Author: Z1parR
Cheers Steve
Can anyone confirm or deny that 1000A2 and 650C3 use the same master cylinder , i think they're the same unit ?
Posted: Tue Apr 02, 2013 9:08 pm
Author: KeithZ1R
apparently Mk11 LTD or Police are the only 1000 types that are the same geoff
Posted: Tue Apr 02, 2013 9:16 pm
Author: 000zeds
Z1parR PM sent
Posted: Tue Apr 02, 2013 9:38 pm
Author: paul doran
the A2 is the same as the MK2 and the Ltd and Z1000P
Posted: Wed Apr 03, 2013 6:41 am
Author: Ginger Bear
Geoff, Kawasaki.com list all theses models as using part No. 43015-1007
KH400-A3 (1976)
KH400-A4 (1977)
KH400-A5 (1978)
KZ1000-A1 (KZ1000) (1977)
KZ1000-A2 (KZ1000) (1978)
KZ1000-A2A (KZ1000) (1978)
KZ650-B1 (1977)
KZ650-B2 (1978)
KZ650-B2A (1978)
KZ650-B3 (1979)
KZ750-B1 (1976)
KZ750-B2 (1977)
KZ750-B3 (1978)
KZ750-B4 (1979)
But don't forget that it's an American site & I don't think it was fitted to our (UK) Z1000-A1
Re: a2 front
Posted: Wed Apr 03, 2013 12:44 pm
Author: KeithZ1R
andy c wrote:Found this not good but may help
Andy whats this off please ?
Posted: Wed Apr 03, 2013 12:47 pm
Author: paul doran
Keith thats off an A2/3
Posted: Wed Apr 03, 2013 6:49 pm
Author: Z1parR
Thanks guys , bit of information overload there
It is the triangular one that i need like in this link .
Been studying/cross reffing on CMSNL but can't decipher any valuable information .
http://jarlef.no/Kawasaki/Images/Z650/p ... 79det2.jpg
twozeds , no PM has arrived mate
