Page 1 of 1
GPz B1/2 cams
Posted: Thu Mar 28, 2013 9:09 am
Author: Big Fluff
Before I put the Z1000J engine up for sale, I want to make sure the GPz1100B1 engine I've bought is sound.
However, the cams were stored dry and are FUBAR'd. I believe the cams are different between the 'J' and the 'GPz'
Anyone got a good set of GPz cams before I purchase some Oriebt Express items.
Thanks, Will
Posted: Thu Mar 28, 2013 11:41 am
Author: martinz1000r
Unitrak or B2?
Posted: Thu Mar 28, 2013 12:21 pm
Author: Big Fluff
As stated in the Wanted header - B1/2
Posted: Thu Mar 28, 2013 1:08 pm
Author: martinz1000r
Big Fluff wrote:As stated in the Wanted header - B1/2
oops! i have spare Unitrak but not B.
Posted: Thu Mar 28, 2013 4:43 pm
Author: Big Fluff
Any idea who manufacturers cams to fit the B1/2.?
Are they the same as Z1000/1100R ELR.??
Posted: Thu Mar 28, 2013 7:21 pm
Author: ruffle
I thought APE did some for the Bs.
Posted: Thu Mar 28, 2013 8:17 pm
Author: london calling
B1 cams are the same as J1/J2 IIRC
B2 are the same as Z1000 R2.
The genuine Kawasaki workshop manual has the cam specs for the J and B1/B2 models.
Posted: Thu Mar 28, 2013 8:22 pm
Author: ADRIAN H
Posted: Fri Mar 29, 2013 11:50 am
Author: Big Fluff
london calling wrote:B1 cams are the same as J1/J2 IIRC
B2 are the same as Z1000 R2.
The genuine Kawasaki workshop manual has the cam specs for the J and B1/B2 models.
Cheers Jack, guess I'll just use the ones out of my 'J' motor then.
Will