Page 1 of 2
kick start blank cover
Posted: Wed Dec 26, 2012 8:36 pm
Author: z1000puddin
I know APE do these, but the shaft needs to be removed in order to fit.
Anyone know of a blanking cover, that will fit with the kick start shaft still in situ ??
Before I have one machined up .
Stu
Posted: Wed Dec 26, 2012 9:59 pm
Author: prowlerz1
why would you need a blanking cover if you are leaving the shaft in just get a top hat cover off fleabay for a shed 1r
Posted: Wed Dec 26, 2012 10:14 pm
Author: z1000puddin
prowler,
I did try & find a Z1-R cover, but no joy as yet.
Stu
Posted: Wed Dec 26, 2012 10:51 pm
Author: jimmock
Quick fix........
Just grind the shaft off to give enough clearance.
That way you can leave the shaft in situ.
Posted: Wed Dec 26, 2012 11:11 pm
Author: Pigford
z1000puddin wrote:prowler,
I did try & find a Z1-R cover, but no joy as yet.
Stu
Dead common - usually only a couple of quid....
http://www.ebay.co.uk/itm/KAWASAKI-Z1-Z ... 484dfe06d5
Posted: Wed Dec 26, 2012 11:27 pm
Author: KeithZ1R
had about 5 of these and they are good expect to pay around a tenner for it tho not sure how
Posted: Wed Dec 26, 2012 11:33 pm
Author: z1000puddin
Cheers Piggy,Just what I am after.
Must be something wrong with my ebay search
I tried this earlier this evening & nothing came up ( I searched "kickstart shaft end cap")
Stu
Posted: Wed Dec 26, 2012 11:39 pm
Author: Z1parR
A google search for ' end cap ' could have unearthed some interesting results
Posted: Thu Dec 27, 2012 12:31 am
Author: jimmock
Z1parR wrote:A google search for ' end cap ' could have unearthed some interesting results
Where are the links??
kick start blank cover
Posted: Thu Dec 27, 2012 1:46 am
Author: Spen72
I just got an end cap off of ebay for my z1000. ...I'll find the add code for you. ..Spence
Posted: Thu Dec 27, 2012 7:14 am
Author: z1000puddin
jimmock wrote:Quick fix........
Just grind the shaft off to give enough clearance.
That way you can leave the shaft in situ.
Now Now Jim.
I am not grinding my shaft
And I always pull my shaft out
Posted: Thu Dec 27, 2012 10:21 am
Author: Keefleaf
Top off a bottle of Brut aftershave.
Didn't you get some for Xmas
Posted: Thu Dec 27, 2012 4:37 pm
Author: slappa13
if no joy on ebay i have 2 spare you can have one free. Neil
Posted: Thu Dec 27, 2012 8:47 pm
Author: Rich
z1 do an alloy version. The rubber ones do the job well enough if you can't be bothered to split the cases.
Posted: Fri Dec 28, 2012 4:08 pm
Author: Z1parR
jimmock wrote:Z1parR wrote:A google search for ' end cap ' could have unearthed some interesting results
Where are the links??
OK while you asked for it , check these out .
They may not do for your kickstart shaft but i'm sure you can think of other uses
http://www.componentforce.co.uk/categor ... er-end-tip