Page 1 of 1
Z1100A1 J1 J2 R1 CLOCK/SPEEDO TACHO BRACKET 25008-1034
Posted: Tue Dec 25, 2012 6:19 pm
Author: Padders
Hi I am looking to buy the speedo tacho mounting bracket for a Z1100A1 KZ1100A1 shaft drive 1981 if anyone has one for sale.
As below it i the same part as the J model and R1
Cheers
Posted: Wed Dec 26, 2012 9:43 am
Author: london calling
Brucie,is this the same bracket as the Z1000 J1/J2 clocks use ??
Posted: Wed Dec 26, 2012 9:55 am
Author: PJ
london calling wrote:Brucie,is this the same bracket as the Z1000 J1/J2 clocks use ??
Brucie??
Posted: Wed Dec 26, 2012 10:02 am
Author: Ginger Bear
Ian, part No. is 25008-1034 & according to Kawasaki.com is common to these other models;
Model (5):
KZ1000-J1 (1981)
KZ1000-J2 (1982)
KZ1000-R1 (Eddie Lawson Replica) (1982)
KZ1100-A1 (Shaft) (1981)
KZ1100-A2 (Shaft) (1982)
I do have a set of 'J' clocks, but from memory they are fractured around the mounts. I will go & check once I can get away from all the family festivities...
Posted: Wed Dec 26, 2012 11:20 am
Author: steve.w
Posted: Wed Dec 26, 2012 11:43 am
Author: london calling
Brucie,I'm pretty sure that I've got a clock bracket but not exactly sure where it is
I'm over to the unit on saturday,so I'll let you know when I've checked over there.
Posted: Wed Dec 26, 2012 11:56 am
Author: Ginger Bear
steve.w wrote:http://www.ebay.co.uk/itm/Kawasaki-Z-1000-J1-Speedometer-Tachometer-Clocks-Bracket-/330825424987?pt=UK_Motorcycle_Parts&hash=item4d06bb605b
This one is broken, the mounts to the top yoke have snapped off. Pity the seller didn't care to mention it in his description. There are pictures, but if you didn't know what you were looking for........
Posted: Wed Dec 26, 2012 12:36 pm
Author: Padders
Thanks Jack appreciate that
Thanks Steve for the information mine has broken in the same place and had some mounts welded on but not very well.
As for Brucie thats between Jack and Me maybe one day when I have had a few beers I will tell you.
Posted: Thu Dec 27, 2012 1:12 pm
Author: paul doran
Ian I have one if Jack cannot sort You out
err I mean Brucie
Posted: Thu Dec 27, 2012 2:06 pm
Author: Padders
Thanks Paul appreciate it. will see how jack does then be in touch if he cannot find one.
Have a good run out this sat and remember to post some pictures.
Posted: Sat Dec 29, 2012 5:32 pm
Author: Padders
Jack has found one but thanks for the offer Paul.
Cheers
J brackets
Posted: Sun Dec 30, 2012 3:03 pm
Author: elr-21
These are hard to find meanwhile.
Most they are broken!
I found one some years ago made of stainless steel - little bit to thick but unbreakable. So far I know a small series was made.
If this is not for a showroom-condition-bike with only genuine parts I think stainless stell is the very best solution.
Cheers
PS: I gave mine to a friend who use it until today
Posted: Thu Jan 03, 2013 4:22 pm
Author: Ginger Bear
Just found a steel replacement on Alan's Kipkawa site;
http://www.kipkawa.co.uk/parts.php?link=NEW%20PARTS
Posted: Fri Jan 04, 2013 12:12 am
Author: elr-21
Yes, something like this one I meaned!
Cheers