Page 1 of 1
early carbs Z1A/B choke plungers with seals
Posted: Wed Dec 19, 2012 7:30 pm
Author: paul doran
one of Our Members is looking to source 4 of the choke plunger rods complete with seals for His Z1B anyone any ideas of where to get them
Z Power dont have any
Posted: Wed Dec 19, 2012 9:26 pm
Author: z1bman
good luck. very difficult part to get new there was a company in the us selling refurbished ones as a set for $64 but Have not seen them for sale for a while stever1 who is a member on here managed to purchase three new from cradley kawasaki + another one from Sweden i think but he was loooking for ages
Posted: Thu Dec 20, 2012 1:07 pm
Author: paul doran
thanks for that
Posted: Thu Dec 20, 2012 1:25 pm
Author: paulstrees
If they are the same as A4,s I can help out
Posted: Thu Dec 20, 2012 1:27 pm
Author: paul doran
Paul I got Your PM
I am not sure if they are the same
Anyone else know ?
Posted: Thu Dec 20, 2012 2:50 pm
Author: z2.john
paul doran wrote:Paul I got Your PM
I am not sure if they are the same
Anyone else know ?
Unfortunately not
16016-010 for Z1
16016-017 for Z900
Posted: Thu Dec 20, 2012 4:35 pm
Author: paul doran
cheers John for the reply
Posted: Thu Dec 20, 2012 8:25 pm
Author: steve r1
as z1bman said i had the last 3 plungers that cradley kawasaki had, got another from kawasaki triple switzerland ,very pricey,these were for early z1a carbs with the large drain bolt on float chamber,part no ended 010 ,i think z1b plungers are different size,i changed mine as i thought they were faulty as it turned out problem was poor compression not the carbs. i still have the four plungers i took out and replaced.
kawasaki triple switzerland
Posted: Thu Dec 20, 2012 8:49 pm
Author: steve r1
Website:
http://www.kawasaki-3-zylinder.ch ,just looked on website plungers 16016-010 are 35 euros plus post
Posted: Thu Dec 20, 2012 8:52 pm
Author: malmojoe
The part numbers are 16016-016 and 16016-010. They changed at frame number 32818 but I'm not sure which was first. I would guess 010 ??