Page 1 of 1
GPZ1100 Uni Trak A2 or A3 lower yoke
Posted: Wed Dec 19, 2012 2:59 pm
Author: Eric Frith
As per title, I'm in need of the the longer GPZ1100 A2 or A3 Uni trak lower yoke for a race project..
I think the frame tube is about 210mm on these models so the stem needs to suit.
Ta in advance.
Posted: Wed Dec 19, 2012 4:55 pm
Author: Ginger Bear
Eric,
I have one including the top yoke. Visible stem (without top yoke fitted) is approx 255mm.
It comes with bearings (shagged) + all stem nuts etc.
Your's for £10 + whatever the postage is. I would guess less than a fiver. If you want it you can pay me once I've posted it.
Posted: Wed Dec 19, 2012 5:32 pm
Author: Eric Frith
Did it by chance come from the frame I bought from you earlier? If so...ideal
Posted: Wed Dec 19, 2012 5:40 pm
Author: Eric Frith
I'll double check, but I think 255mm might be the short one.
Posted: Wed Dec 19, 2012 6:03 pm
Author: Ginger Bear
Eric Frith wrote:Did it by chance come from the frame I bought from you earlier? If so...ideal
Yes it did.
Posted: Thu Dec 20, 2012 9:32 am
Author: Eric Frith
255mm is indeed correct, PM sent.
Ta
Posted: Fri Dec 21, 2012 12:51 pm
Author: Ginger Bear
Posted today.
you mentioned gpz1100 A2-3 !!!!!!!!!!
Posted: Sat Dec 22, 2012 12:51 pm
Author: kwacka
hello guys !!
you mentioned gpz 1100 A 2-3 , almost had stroke !, lil! buy any chance you might have or giude me to a gpz1100 A 1-2-3- rear complete mudgaurd , like hens teeth , lol. they were also on the gpz 82-5 turbo, but no lick yet finding it . any idea,s guys , total restore of the old girl gpz1100 A1. every chopped them to give them the , this is all you will see of my tyre , but sought after now this piece ,
thanks for listening , have fun ,
kwacka !!
Posted: Sun Dec 23, 2012 3:15 pm
Author: Ginger Bear
kwacka,
You could try John Browse Tel. 01978 355556
gpz 1100,
Posted: Sat Jan 05, 2013 7:49 pm
Author: kwacka
thank mate ,
sorry for late reply great answer , will try this tomorrow , hope for some luck , need a bit with the old girl ,
. all the best , kwacka ,
a1 bits
Posted: Sun Jan 06, 2013 8:15 am
Author: DDZ900
kwacka ! pm sent
