Page 1 of 1
Need one of these.
Posted: Wed Nov 07, 2012 2:32 pm
Author: ted1r
Just pull the motor to bits to find although the bores pistons rings cam chain idlers ect are all in exceptionable condition the screw in bottom guide was broke in half ,luckily both pieces were still there.
Anyone got a spare for sale????????????
Ted
Posted: Wed Nov 07, 2012 3:23 pm
Author: KeithZ1R
Which.? what ??
Posted: Wed Nov 07, 2012 3:48 pm
Author: chrisu
If you mean the front slipper guide then I'd strongly suggest fitting a new one.
Posted: Wed Nov 07, 2012 3:58 pm
Author: KeithZ1R
The original one was only a M6 x 20 crosshead screw but theres. Couple of point that dont quite fit ?
Posted: Wed Nov 07, 2012 5:14 pm
Author: z1bman
Posted: Wed Nov 07, 2012 5:17 pm
Author: Ginger Bear
Ted, I have a 'part worn' one, you can have, But I chose to fit a new one, as they are notorious for breaking...........
.................... Go on, spoil yourself!
https://www.z-power.co.uk/merchantmanag ... cts_id=440
post
Posted: Sun Nov 11, 2012 6:48 pm
Author: ted1r
Thanks for all your help .got it in my head that these where either not available or very exxy.
I.ll ring the Phil in morning.
Ted
Posted: Sun Nov 11, 2012 8:51 pm
Author: KeithZ1R
did i completely miss a point here I thought you said the screw was snapped in half ?