z650 rear drum wheel
Posted: Sat Oct 13, 2012 7:16 am
Now this is a maybe but putting this on just incase someone has one
18 inch
18 inch
Z1OwnersClub GB
Kawasaki's Air Coooled Big Fours
http://rtest.z1ownersclub.co.uk/phpBB3/
z650 rear drum wheel
http://rtest.z1ownersclub.co.uk/phpBB3/viewtopic.php?f=3&t=22137
Page 1 of 1
Posted: Sat Oct 13, 2012 7:56 am
alloy or spoked?
Posted: Sat Oct 13, 2012 8:02 am
Mark alloy mate, not 100% yet but its a maybe, gonna check in a bit think mines got a slight buckle,
Posted: Sun Oct 14, 2012 2:08 pm
Mark had a good check of the back wheel and it aint buckled which im happy about, thanks for your feedback mate 
Did you say you had spoked wheels also,
Did you say you had spoked wheels also,
Posted: Sun Oct 14, 2012 3:41 pm
set of kawasaki alloys and a set of cma's
Posted: Sun Oct 14, 2012 3:47 pm
Mark the cma,s are alloys aint they
Posted: Sun Oct 14, 2012 4:13 pm
Yes, paid a lot for then too! 
Posted: Sun Oct 14, 2012 4:30 pm
Ok mate, wouldnt mind some spokes but goto see how things go, did you see my carb thread
Posted: Sun Oct 14, 2012 8:23 pm
Just looked in the garage , I've a rear drum /spoked wheel that i think's off a 650. got it in a job lot with a z650B3 project which is now gone
18" diam, 2.15x18 rimsize stamped on the rim
17mm diam axle
"usable range" casting on the brake backplate
42 teeth on the sprocket. 6 bolt sprocket carrier.
drum diam looks like 178mm.
will need respoked (rusty) and new rim ( hefty tyre lever marks or something) and blasted/polished.
complete with axle, nut and spacers,
and chain adjusters possibly if i can find them
18" diam, 2.15x18 rimsize stamped on the rim
17mm diam axle
"usable range" casting on the brake backplate
42 teeth on the sprocket. 6 bolt sprocket carrier.
drum diam looks like 178mm.
will need respoked (rusty) and new rim ( hefty tyre lever marks or something) and blasted/polished.
complete with axle, nut and spacers,
and chain adjusters possibly if i can find them
Posted: Sun Oct 14, 2012 8:24 pm
Just looked in the garage , I've a rear drum /spoked wheel that i think's off a 650. got it in a job lot with a z650B3 project which is now gone
18" diam, 2.15x18 rimsize stamped on the rim
17mm diam axle
"usable range" casting on the brake backplate
42 teeth on the sprocket. 6 bolt sprocket carrier.
drum diam looks like 178mm.
will need respoked (rusty) and new rim ( hefty tyre lever marks or something) and blasted/polished.
complete with axle, nut and spacers,
and chain adjusters possibly if i can find them
18" diam, 2.15x18 rimsize stamped on the rim
17mm diam axle
"usable range" casting on the brake backplate
42 teeth on the sprocket. 6 bolt sprocket carrier.
drum diam looks like 178mm.
will need respoked (rusty) and new rim ( hefty tyre lever marks or something) and blasted/polished.
complete with axle, nut and spacers,
and chain adjusters possibly if i can find them
Posted: Sun Oct 14, 2012 10:28 pm
Got this?
