Z1000J/R or Z1100ST cylinder and pistons wanted
Posted: Sat Sep 08, 2012 1:27 pm
Alrighty,
due to a "slight" mishap of the US Postal Service my 1170 Wiseco pistons are taking a little sightseeing detour to Australia instead of going straight to Austria (which is in Europe, just in case the USPS is reading this).
As there are some fine weather days still ahead, I'd love to get my Z1000J back on the road.
In an ideal world I would be looking for a set of good standard pistons and cylinder from a Z1100ST (i.e. the silver painted ones), but as beggars can't be choosers, I would also take a set of GPZ1100 pistons, if nothing else comes up, and the price is right, a set of Z1000J or R cylinders would be fine too.
Z1100ST would be my first choice though. If you happen to have a ready made cylinder block with Wisecos... well, that would be an option too (of course).
The only MUST: MUST BE for 17MM pistons.
due to a "slight" mishap of the US Postal Service my 1170 Wiseco pistons are taking a little sightseeing detour to Australia instead of going straight to Austria (which is in Europe, just in case the USPS is reading this).
As there are some fine weather days still ahead, I'd love to get my Z1000J back on the road.
In an ideal world I would be looking for a set of good standard pistons and cylinder from a Z1100ST (i.e. the silver painted ones), but as beggars can't be choosers, I would also take a set of GPZ1100 pistons, if nothing else comes up, and the price is right, a set of Z1000J or R cylinders would be fine too.
Z1100ST would be my first choice though. If you happen to have a ready made cylinder block with Wisecos... well, that would be an option too (of course).
The only MUST: MUST BE for 17MM pistons.