Alrighty,
due to a "slight" mishap of the US Postal Service my 1170 Wiseco pistons are taking a little sightseeing detour to Australia instead of going straight to Austria (which is in Europe, just in case the USPS is reading this).
As there are some fine weather days still ahead, I'd love to get my Z1000J back on the road.
In an ideal world I would be looking for a set of good standard pistons and cylinder from a Z1100ST (i.e. the silver painted ones), but as beggars can't be choosers, I would also take a set of GPZ1100 pistons, if nothing else comes up, and the price is right, a set of Z1000J or R cylinders would be fine too.
Z1100ST would be my first choice though. If you happen to have a ready made cylinder block with Wisecos... well, that would be an option too (of course).
The only MUST: MUST BE for 17MM pistons.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Z1000J/R or Z1100ST cylinder and pistons wanted
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Z1000J/R or Z1100ST cylinder and pistons wanted
There's no replacement for displacement!
Re pistons
Hi I'm having the same problem. Who did you source your 1170 pistons from?
Cheers Vince
Cheers Vince
Who is online
Users browsing this forum: No registered users and 12 guests