Page 1 of 1
26mm Carb Needle Jets
Posted: Sun Aug 26, 2012 3:55 pm
Author: PJ
Hi Guyz,
Anyone know where I can get four needle jets for the standard Z1000A1 26mm carbs please
Many thanks
carb bits
Posted: Sun Aug 26, 2012 4:43 pm
Author: DDZ900
pj ! is it the needles themselves like ? i have a few sets of carbs i use 4 spares.
Posted: Sun Aug 26, 2012 4:50 pm
Author: PJ
Hi Duanne,
No mate its the jets that the needles run through in the body of the carb
Cheers
Posted: Sun Aug 26, 2012 4:54 pm
Author: Pigford
PJ wrote:Hi Duanne,
No mate its the jets that the needles run through in the body of the carb
Cheers
......often called EMULSION TUBES as well as NEEDLE JETS
EMULSION TUBES
Posted: Sun Aug 26, 2012 5:07 pm
Author: KWACKERZ1
Try Allens
They seem to do moust stuff for mikunis'
What are the refernec numbers I can have a rummage through a set I have but I cant remember if they are GS or zed ones
Re: EMULSION TUBES
Posted: Sun Aug 26, 2012 5:14 pm
Author: PJ
KWACKERZ1 wrote:Try Allens
They seem to do moust stuff for mikunis'
What are the refernec numbers I can have a rummage through a set I have but I cant remember if they are GS or zed ones
This sis whats on the parts fiche
16017-1034 NEEDLE JET,AO-5
Cheers guyz
Posted: Sun Aug 26, 2012 5:27 pm
Author: tlc
Allens or NRP do 'em.
I bought some not so long ago.
Posted: Sun Aug 26, 2012 6:39 pm
Author: PJ
tlc wrote:Allens or NRP do 'em.
I bought some not so long ago.
Thanks Chris - any idea how much they were - I might just buy the kits at £20 a carb
carb bits
Posted: Sun Aug 26, 2012 7:02 pm
Author: DDZ900
pj ! il have them aswell if you need 2nd hand ones ???