plastic rings
Posted: Tue Jul 24, 2012 7:32 pm
As per title, they go inside the screw on bit that holds the HT leads in the coils, need 4 if anyone got any please.
Z1OwnersClub GB
Kawasaki's Air Coooled Big Fours
http://rtest.z1ownersclub.co.uk/phpBB3/
plastic rings
http://rtest.z1ownersclub.co.uk/phpBB3/viewtopic.php?f=3&t=20981
Page 1 of 1
Posted: Tue Jul 24, 2012 10:10 pm
not available as a separate part unless someone has an old coil. i would just trim back the coil wire about 12mm + coat the outside of the lead with some silicone. push the lead into the coil with some pliers then tighten the plastic nut
Posted: Wed Jul 25, 2012 8:14 pm
Cheers for that but i found mine
in the really safe place i put them many months ago
in the really safe place i put them many months ago