Ay up Chaps,
Can I download a digital copy of an owners/service manual for a Z1000a2?
Or has anyone got an analogue copy they don't want?
Cheers,
Bongo.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Z1000 owners/service manual
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Z1000 owners/service manual
"Keep on Rockin'!"
Hi Bongo
There is a Z1000 A1 Assembly & Prep Manual on my rebuild website if that's of any use.
http://www.zedrider.co.uk/manuals--info.html
It also has a Z1 Factory Manual - and judging by the Haynes book I have most of the stuff is very much the same other than front brake and rear disc of course.
Someone like PJ or MaineKZ will advise you I am sure.
Cheers from Mark
There is a Z1000 A1 Assembly & Prep Manual on my rebuild website if that's of any use.
http://www.zedrider.co.uk/manuals--info.html
It also has a Z1 Factory Manual - and judging by the Haynes book I have most of the stuff is very much the same other than front brake and rear disc of course.
Someone like PJ or MaineKZ will advise you I am sure.
Cheers from Mark
Z1-R D1, Z650 B2, Z1-B & ZRX 1200 A1P Catch 'em if you can at www.Zedrider.co.uk
Hi Bongo
Don't know if you are doing any work on the motor but there is a magazine series by Dave Marsden from Z Power taking you right through strip down, examination and rebuild of Z900 & early 1000 motors here for you.
It's a good read even if you are not going that far this time.
Aparently the main engine change on the A2 was some crank shaft modification for the woodruff key. Take a look anyhow - here you go -
Also a short service guide for 900 motors which will be mostly applicable to your machine.
http://www.zedrider.co.uk/magazine-articles.html
Don't know if you are doing any work on the motor but there is a magazine series by Dave Marsden from Z Power taking you right through strip down, examination and rebuild of Z900 & early 1000 motors here for you.
It's a good read even if you are not going that far this time.
Aparently the main engine change on the A2 was some crank shaft modification for the woodruff key. Take a look anyhow - here you go -
Also a short service guide for 900 motors which will be mostly applicable to your machine.
http://www.zedrider.co.uk/magazine-articles.html
Z1-R D1, Z650 B2, Z1-B & ZRX 1200 A1P Catch 'em if you can at www.Zedrider.co.uk
Who is online
Users browsing this forum: No registered users and 5 guests