Page 1 of 1
1075cc barrels
Posted: Sun Apr 22, 2012 6:30 pm
Author: hillbilly
wanted a set of 1075cc barrels,any one got some for sale,or swap.

Posted: Sun Apr 22, 2012 9:53 pm
Author: neilbarrett
what bore size is that in mm?
Posted: Mon Apr 23, 2012 10:25 am
Author: zed1015
72mm = 1075.
73mm = 1105.
Posted: Mon Apr 23, 2012 4:01 pm
Author: Rich
Do you want to bore them to 73mm or be perfect at 72? I have a set of 1015 bored to 72mm but think they have a couple of chips on the fins. Would happily swap for 1015 barrels - not bothered if they need a re-bore or not.
Posted: Mon Apr 23, 2012 4:11 pm
Author: hillbilly
rich i have some 1015cc barrels ,they have a few bits of fin damage,the fins are really thin and delicate,compared to others i have seen,the sleaves are in good nick,they were blasted before i got them,need a bit of cleaning,but ok,im after a set of 72mm for my new build bike,it would save an expence of having them rebored if you would swap me.

Posted: Mon Apr 23, 2012 5:01 pm
Author: Rich
I'll get em out, measure them up and let you know the results. I'll email the pics
Posted: Mon Apr 23, 2012 6:45 pm
Author: Rich
there's an email in the either!
Posted: Wed Apr 25, 2012 3:43 pm
Author: hillbilly
on its way rich.

Posted: Thu Apr 26, 2012 5:39 pm
Author: Rich
Received today, I'll post it back tomorrow after work.
Posted: Mon Apr 30, 2012 3:24 pm
Author: hillbilly
cheers rich,received today.now on with engine build.
