Page 1 of 1
33mm smoothbores
Posted: Mon Mar 05, 2012 4:54 pm
Author: hillbilly
parts needed for a set of these,
four float bowls
four floats
four carb tops
anyone got anything.29mm smoothbore bits fit.
Posted: Mon Mar 05, 2012 8:02 pm
Author: neilbarrett
do pigs fly
try allens performane ( i think)
Posted: Mon Mar 05, 2012 8:16 pm
Author: Pigford
Brent - you got the ones off eBay last week then
Posted: Mon Mar 05, 2012 8:21 pm
Author: hillbilly
i won a set from blackburn for£42.worth spending on at that price.
Posted: Tue Mar 06, 2012 6:16 pm
Author: tricky
hi hillbilly, brass floats are still available from allens performance, but they dont loook any different to normal z1000 floats to me, float bowl gaskets, carb top gaskets still available, as are the jets and orings, dont know about actual float bowls and carb tops tho' have a look on sudco mikunis site as they have a parts list for 33's on there some where, i have just bought the mikuni manual from the states with this info in, but i am out of time as i am on my way to work now, but it is all on the net, goood luck
Posted: Tue Mar 06, 2012 7:10 pm
Author: hillbilly
cheers guys,that allen site is good for bits.
think i can get everything but bowls,theres some somewere.
Posted: Tue Mar 06, 2012 7:25 pm
Author: Rich
drop Jeff a line at Z1
Posted: Tue Mar 06, 2012 7:36 pm
Author: ADRIAN H
You could try Wired George in the states
YO
Posted: Tue Mar 06, 2012 9:30 pm
Author: Hobbo
Posted: Tue Mar 06, 2012 9:43 pm
Author: hillbilly
you cant beat these though phil,
http://www.ebay.com/itm/120839402124?ss ... 1423.l2649
if i had the dosh,i would be owning these.
now people might understand why my new project has not been put on forum yet.because the parts i need for it are rareish.
therefore the price of bits goes through the fecin roof.