Z900A4 Cylinder Head Needed

[steve]

Needed by a friend of mine, Mark Grandvoinet, who I'm sure many of you will know. Mark doesn't use the internet so asked me if I could post this for him. His cylinder head is badly cracked and expert advice has recommended that he replaces it, so if anyone here has a good one for sale, you can either contact me or telephone Mark direct (01424 731971).

Thanks,
Steve

[z1000puddin]

Steve,
I have a spare head,but it is a US head with the smog ports filled.
It has 8mm studs,one has small part of the alloy around one stud chipped of.
One cylinder has the small crack on the plug hole.
Has 4 cam caps & valves/buckets are all present, but I have never had these out so dont know if they are good or bad.

I can take a pic if it is something that he could use.

Stu

[steve]

Thanks for the offer Stu, however, the crack in Mark's cylinder head is also around the plug hole, albeit a pretty bad one...think it's unlikely that he'd want to go for another one...but thanks anyway.

Steve

[hanskloss]

small cracks joining the plug hole and valve seats were often formed during casting, not unusual and nothing to worry about